hubs can be bought complete with bearings/seal/cap/lug nuts for around $35, here's one. It's a very good fit, if you didn't know the Dexter bearings were 1" and the HF axle was 25mm, you'd never be able to tell when you installed the Dexter hub on the HF axle.ฤก250-lb. bearings is on the HF axle the HF hub in on the floor. In the photo below a Dexter hub with 1" I.D. Because trailer bearings/spindles are designed for an easy slip fit, and because there's only one thousandth of an inch difference in the spindle diameters, hubs designed for 1" axles will fit very nicely on the Harbor Freight axles. The Harbor Freight spindle measures 0.979, which is only 0.001 less than the Dexter spindle. The spindles that came with the Dexter hubs measure 0.980 O.D. ![]() ![]() ![]() (each) hubs here, the bearings are 1" I.D. Here's a link to replacement bearings on amazon: The spec for the HF bearings is 30205 Taper Wheel Bearings, 25mm i.d.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |